Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Brighton East VIC · Bayside Melbourne

Split System Installation in Brighton East, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Brighton East and surrounding suburbs.

Split system installation in Brighton East

Landcox Park sits in the middle of Brighton East, and the streets around it are full of the suburb's signature stock — solid interwar California bungalows and clinker-brick homes, most of them double brick with terracotta-tiled roofs. That construction is the first thing that shapes a job here. Double brick means there's no timber cavity to feed a pipe run through, so we plan the route properly — core-drilling through the brick in the right spot, keeping the outdoor line short and neat rather than running metres of ducting across a rendered wall. The bungalows are typically chopped into defined rooms rather than open-plan, with the living areas mid-floorplan, so a single big head in one spot doesn't always distribute well; we'll often talk through zoning with a couple of smaller heads or a multi-head instead. Ceilings tend to sit around 2.7 to 3m in these homes, and many have been renovated at the back with a glassy open extension that pulls a lot of afternoon sun, so we size for that rather than the original room. Switchboards in the un-renovated homes often need an upgrade to carry a reverse-cycle load. Brighton East is a bit further from the water than its neighbour, so salt is less of a factor, but the finish still matters here — these are well-kept homes and the work needs to look it.

❄ Bayside, set back from the water — mild summers, less salt but hot northerlies and west sun

Why Brighton East homeowners choose Bellair

Brighton East is about thirty-eight kilometres north-west of our Botanic Ridge base. Typical work here is careful routing through double-brick bungalows, zoned multi-heads for the compartmentalised floorplans, and sizing for the glassy rear extensions people have added, plus switchboard upgrades on the older un-renovated homes. Matt has 28 years in the trade and holds ARCtick licence AU 55218, so the refrigerant handling is done properly. Every install carries the full manufacturer warranty and our 7-year workmanship warranty. We fit Mitsubishi Electric, Fujitsu, Toshiba, Panasonic, Samsung, Haier and LG, and we'll match the unit to how the home's laid out rather than push a brand. Price is fixed and agreed before we begin.

What's included in your Brighton East install

A Brighton East install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On the double-brick bungalows here we allow extra time to core-drill in the right spot and keep the pipe run short and tidy rather than cutting a long line across the brickwork. It's all in the fixed price agreed up front, with any switchboard upgrade flagged before you commit.

Postcode: 3187 · Council: Bayside City Council · Region: Bayside Melbourne

Typical home styles: California bungalow, interwar clinker brick, Edwardian, contemporary rebuild

Local landmarks: Landcox Park · Dendy Park · Hurlingham Park

Get your Brighton East quote in under a minute

We also install close to Brighton East

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.