Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Frankston VIC · Bayside Mornington Peninsula

Split System Installation in Frankston, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Frankston and surrounding suburbs.

Split system installation in Frankston

Frankston runs from the waterfront and the pier back up through a real mix of housing — post-war weatherboards, sixties brick, blocks of units, and renovated places closer to the beach — so no two streets throw up quite the same job. Down near the foreshore and Olivers Hill you get the salt-air factor: outdoor units within a few blocks of the bay corrode faster if they're not sited and specced with that in mind, so we keep them off the most exposed walls where we can and talk through the coastal-rated options. Further back it's more about the age of the housing. The post-war and older brick homes have smaller, boxier rooms and switchboards that were never built for a reverse-cycle load, so we check the board early. Cavity brick means we plan pipe runs rather than punch holes wherever's convenient. The renovated homes and townhouses closer to the station are usually open-plan and simpler, though tight side access can make outdoor placement fiddly. Sizing depends heavily on which Frankston you're in — a small original weatherboard needs a modest head, while a knocked-through open-plan reno with a glazed rear extension needs proper capacity for the western sun off the bay. We've worked right across the suburb, from the hill to the flat, and we quote to the actual home in front of us rather than a one-size figure.

❄ Bayside coastal — sea breezes, milder summers, salt exposure on units near the foreshore

Why Frankston homeowners choose Bellair

Frankston's around eighteen kilometres from our Botanic Ridge base — a straightforward run for us. The jobs here are as varied as the housing: coastal-conscious installs near the foreshore, switchboard upgrades and replacements in the older brick and weatherboard homes, and clean single-head fits in the townhouses closer to the station. Matt has 28 years in the trade and holds ARCtick licence AU 55218, so the gas side is done right. Every install comes with the full manufacturer warranty plus our 7-year workmanship warranty. We fit Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll match the unit to your home rather than push a brand. Fixed price agreed before we start.

What's included in your Frankston install

A Frankston install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On homes near the foreshore we take care siting the outdoor unit away from the worst of the salt exposure, and on the older brick and weatherboard homes we allow time to check the switchboard and route pipework cleanly through cavity walls. It's all in the fixed price agreed up front, board upgrade flagged before you commit.

Postcode: 3199 · Council: Frankston City Council · Region: Bayside Mornington Peninsula

Typical home styles: post-war weatherboard, 1960s brick, beachside units, renovated coastal homes

Local landmarks: Frankston Waterfront · Frankston Pier · Olivers Hill

Get your Frankston quote in under a minute

We also install close to Frankston

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.