Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Brighton VIC · Bayside Melbourne

Split System Installation in Brighton, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Brighton and surrounding suburbs.

Split system installation in Brighton

The bathing boxes on Dendy Street Beach get the postcards, but the split system work in Brighton is really about what's behind them — some of the biggest and most heavily heritage-controlled housing stock in Melbourne. Grand Victorian and Edwardian homes, Federation mansions, and a wave of large contemporary rebuilds where the old place came down. On the period homes the challenge is scale and finish. High ceilings — often 3.3m or more — mean a head has to move a lot more air than a standard room, so sizing off floor area alone doesn't cut it; we work to the volume. These homes also have ornate cornices, picture rails and frontages you don't want a pipe run anywhere near, so we plan discreet routing, sometimes through subfloor or up the side elevation out of sight from the street. Heritage overlays around Church Street and the older pockets mean we're mindful of where plant can visibly go. The contemporary rebuilds are a different job — open-plan, glazed, and generally easier to run, though they're big and often want multi-head systems to cover the footprint properly. Being close to the bay, salt exposure matters on the beachside streets, so outdoor units get sited with that in mind. Brighton's the sort of place where the finish is scrutinised, so we take the time to keep the work clean and out of sight rather than quick and obvious.

❄ Coastal Bayside — bay breezes, mild summers, salt exposure on the beachside streets

Why Brighton homeowners choose Bellair

Brighton sits roughly forty kilometres north-west of our Botanic Ridge base — a fair drive, but Bayside's a big part of what we do. The jobs here lean toward larger homes: multi-heads across generous floorplans, careful sizing for the high ceilings in the period places, and discreet pipework where heritage frontages are involved. Matt's ARCtick licensed, AU 55218, with 28 years on the tools, so the gas work is by the book. Every install comes with the full manufacturer warranty plus our 7-year workmanship warranty. We install Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll spec the system to suit the home rather than push one brand. Fixed price, agreed up front.

What's included in your Brighton install

A Brighton install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On the grand period homes here we allow extra time to size for the high ceilings and route pipework discreetly around cornices and heritage frontages, and near the beach we keep the outdoor unit off the worst salt exposure. It's all in the fixed price agreed up front, with any switchboard upgrade flagged before you commit.

Postcode: 3186 · Council: Bayside City Council · Region: Bayside Melbourne

Typical home styles: grand Victorian, Edwardian mansion, Federation, contemporary rebuild

Local landmarks: Brighton Bathing Boxes · Dendy Street Beach · Church Street

Get your Brighton quote in under a minute

We also install close to Brighton

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.