Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Clayton VIC · South-East Melbourne

Split System Installation in Clayton, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Clayton and surrounding suburbs.

Split system installation in Clayton

Clayton is where Monash University's main campus and the Monash Medical Centre have completely reshaped what used to be an ordinary post-war working suburb. What's there now is student apartment blocks, townhouse rows, and unit developments jammed in against the remaining brick veneer homes, with one of the most diverse populations in the south-east living on top of it all. Nearly every job here is shaped by density and body-corporate rules rather than the house itself. In the apartments and townhouse rows, getting placement signed off through the owners' corporation is step one, and the setbacks are tight enough that where the condenser lives has to keep it breathing without pointing straight at a neighbour's window a metre away. Landlords running student share houses want cost-controlled systems that'll take a full house of tenants through a heatwave, so a multi-head covering the bedrooms is the usual answer. The older brick homes that remain tend to have three-fuse boards from the fifties or sixties that won't hold a modern inverter, so we bring the switchboard up before the install. Being flat and inland, Clayton takes summer heat without any coastal moderation. It's a high-turnover, budget-aware suburb, and we size sensibly and quote straight for what the property actually needs.

❄ Inland south-east — flat, no coast, hot summers; dense apartment and townhouse blocks

Why Clayton homeowners choose Bellair

Clayton is about nineteen kilometres north-west of our Botanic Ridge base. The work here is owners-corporation-approved placement in the apartment and townhouse blocks, tight-setback siting, multi-heads for student share houses, and switchboard upgrades on the older post-war homes. Matt's ARCtick licensed, AU 55218, with 28 years on the tools, so the refrigerant work is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We install Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll match the unit to the property and budget rather than push a brand. Fixed price agreed before we start.

What's included in your Clayton install

A Clayton install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. In the apartment and townhouse blocks we sort placement within the owners-corporation rules and tight setbacks before we start, and on the older homes we check the switchboard carries a modern load. It's all in the fixed price agreed up front, with any upgrade flagged before you commit. If your place sits in one of the newer townhouse rows close to Monash or the Medical Centre we work to the tight boundary setbacks and keep the outdoor unit clear of the shared-driveway noise zone.

Postcode: 3168 · Council: City of Monash · Region: South-East Melbourne

Typical home styles: student apartment blocks, townhouse & unit developments, post-war brick, migrant & rental housing

Local landmarks: Monash University · Monash Medical Centre · Clayton Road shops

Get your Clayton quote in under a minute

We also install close to Clayton

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.