Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Clyde North VIC · South-East Melbourne growth corridor

Split System Installation in Clyde North, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Clyde North and surrounding suburbs.

Split system installation in Clyde North

Clyde North has been one of the busiest building sites in the state for a decade — Selandra Rise, Berwick Waters, Meridian, the estates just keep rolling out — so nearly everything we touch here is a near-new home, often only a year or two old. That sounds easy, and the pipework usually is: modern brick veneer, back-to-back straight through the wall, short clean runs. The real work in Clyde North is sizing and placement, not plumbing. These homes are big, open-plan, and glazed up on the living zones, and the blocks are packed tight so outdoor units end up close to fence lines and neighbours' windows. Get the condenser location wrong and you've either got a unit choking in a dead-air side passage or one blowing hot air straight at the neighbour a metre away. We spend time on that. Double-storey homes are everywhere out here, so getting a head to an upstairs bedroom means a considered run up the cavity — we work out the neatest path before we start. Ceilings run 2.7m downstairs with the occasional entry void, and we size for the actual volume rather than a rule of thumb, because a head that's a size too small on a west-facing open-plan living room will never keep up on a hot day. For most of these homes a multi-head covering living plus bedrooms is the tidiest answer.

❄ Inland south-east growth corridor — warm summers, tightly-packed estate blocks with little established shade

Why Clyde North homeowners choose Bellair

Clyde North is roughly ten kilometres from our Botanic Ridge base, close enough that we're a local for these estates. The work here is overwhelmingly near-new homes — single and multi-head fits, upstairs bedroom runs in the double-storey builds, and the odd early replacement where a builder-grade unit hasn't lasted. Matt holds ARCtick licence AU 55218 with 28 years in the trade, so the refrigerant handling is by the book. Every install carries the full manufacturer warranty and our 7-year workmanship warranty. We fit Mitsubishi Electric, Fujitsu, Toshiba, Panasonic, Samsung, Haier and LG, and we'll recommend what actually suits your floorplan. Price is fixed and agreed before we start.

What's included in your Clyde North install

A Clyde North install covers supply of the unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On the tight estate blocks out here we take time to get the outdoor unit sited so it breathes and doesn't blast the neighbours, and on the double-storey homes we plan the upstairs run before quoting. It's all in the fixed price agreed up front — nothing added once we're on the tools.

Postcode: 3978 · Council: City of Casey · Region: South-East Melbourne growth corridor

Typical home styles: near-new brick veneer, double-storey house-and-land, open-plan estate homes, Selandra Rise / Berwick Waters builds

Local landmarks: Selandra Rise · Berwick Waters · Meridian estate

Get your Clyde North quote in under a minute

We also install close to Clyde North

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.