Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Dandenong North VIC · South-East Melbourne

Split System Installation in Dandenong North, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Dandenong North and surrounding suburbs.

Split system installation in Dandenong North

Dandenong North stretches up toward the bushland edges of Police Paddocks and Power Reserve, and follows the flats along Dandenong Creek — which gives it a leafier, hillier feel than the flatter city centre just to its south. Housing runs largely to solid post-war stock and 1960s and 70s family homes, brick veneer and weatherboard sitting on decent-sized blocks, and much of that stock is now cycling through its second or third generation of climate systems. Replacement work dominates our days here. Piping on these older homes is typically manageable — a straight-through pierce or a compact routed line — but the meter boards installed decades back rarely handle a modern inverter load without an upgrade first. Interior layouts commonly split a formal front lounge from a family or meals room at the rear, which puts the zoning decision front-and-centre: one well-placed head, or a pair sized to the two spaces. Closer to the creek and the reserves the terrain dips and rolls, so on those sloping blocks we spend extra time picking a spot for the condenser that keeps the base level and the condensate line falling the way it should. With no coast moderating the summer heat, we spec every install for a proper 38-degree afternoon, especially where the living room takes the worst of the west sun. This is a stable, well-kept family suburb and most jobs come down to a reliable, correctly-sized replacement — which is exactly the sort of work we quote plainly.

❄ Inland south-east — no coast, hot summers, greener hillier ground toward the reserves

Why Dandenong North homeowners choose Bellair

Dandenong North is about sixteen kilometres north-west of our Botanic Ridge base. The work here is mostly replacements and single or zoned multi-head fits in post-war and 60s-70s family homes, with switchboard upgrades to suit and a bit of extra care on the sloping blocks near the creek. Matt's got 28 years in the trade and holds ARCtick licence AU 55218, so the refrigerant work is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We install Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll match the unit to the room rather than push a brand. Fixed price agreed before we start.

What's included in your Dandenong North install

A Dandenong North install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On replacements we allow time to pull the old unit cleanly and check the older switchboard carries a modern load, and on the sloping blocks near the creek we site the outdoor unit where it sits and drains properly. It's all in the fixed price agreed up front, with any upgrade flagged before you commit.

Postcode: 3175 · Council: City of Greater Dandenong · Region: South-East Melbourne

Typical home styles: post-war brick, 1960s-70s family homes, weatherboard, sloping-block homes near the creek

Local landmarks: Police Paddocks Reserve · Power Reserve · Dandenong Creek Trail

Get your Dandenong North quote in under a minute

We also install close to Dandenong North

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.