Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Doncaster East VIC · Eastern Melbourne

Split System Installation in Doncaster East, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Doncaster East and surrounding suburbs.

Split system installation in Doncaster East

Doncaster East is Manningham's big residential heartland spreading east and south from Jackson Court and Ruffey Lake Park, and it's a suburb defined by 70s and 80s brick family homes that were built for growing families and are now in the hands of a second or third owner. That single fact - that most of these homes are on their second or third round of heating and cooling - sets the tempo of the work. We're pulling old ducted heaters, twenty-year-old wall boxes and end-of-life splits out routinely, and reworking the layout so the new system suits how the family actually uses the house today rather than the formal-lounge era it was built for. Ceilings sit at a comfortable 2.4 to 2.7 metres on most homes, so sizing is straightforward, but the split-level and stepped floorplans that were fashionable when these homes went up mean the wall you'd love to run pipe through is often on a different level to the room you're cooling. We plan those runs through roof spaces and drop points rather than long trailing horizontal runs down feature walls. Blocks are generous - 700 to 1000 square metres is common - so siting the condenser well away from bedroom windows and neighbour boundaries isn't the squeeze it is closer in. Switchboards from that era almost always need an upgrade, and we check them at quote time so nothing comes as a surprise. Doncaster East is inland, no coast, so it's clean distribution and right-sizing for hot summers.

Eastern Melbourne - no coast, hot summers; hilly terrain and west sun on many homes

Why Doncaster East homeowners choose Bellair

Doncaster East is about thirty-five kilometres north-east of our Botanic Ridge base. The work here is replacements and zoned or multi-head fits in 70s-80s brick homes, considered runs on split-level and sloping-block homes, multi-heads in the rebuilds, and switchboard upgrades to suit. Matt holds ARCtick licence AU 55218 with 28 years in the trade, so the refrigerant work is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We install Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll match the system to the home rather than push a brand. Fixed price agreed before we start.

What's included in your Doncaster East install

A Doncaster East install covers supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On the split-level homes and sloping blocks here we allow time to plan a tidy run across levels and site the outdoor unit where it sits and drains properly, and on replacements we check the older switchboard. It's all in the fixed price agreed up front, with any upgrade flagged before you commit.

Postcode: 3109 · Council: City of Manningham · Region: Eastern Melbourne

Typical home styles: 1970s-80s split-level brick, sloping-block homes, four/five-bedroom family homes, modern rebuilds

Local landmarks: Jackson Court · Ruffey Lake Park · The Pines Shopping Centre

Get your Doncaster East quote in under a minute

We also install close to Doncaster East

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.