Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Edithvale VIC · Bayside Peninsula edge

Split System Installation in Edithvale, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Edithvale and surrounding suburbs.

Split system installation in Edithvale

Edithvale has one distinctive feature that no other bayside suburb has - the Edithvale-Seaford Wetlands, a Ramsar-listed internationally significant wetland complex covering 264 hectares directly east of the residential grid. The wetlands boundary sits about 400 metres from the foreshore and creates a narrow residential strip between two water bodies - the bay to the west and the wetlands to the east - which changes the local humidity and the outdoor unit spec accordingly. Wetlands-adjacent properties east of Nepean Highway pick up higher summer humidity than a typical inland suburb, and we spec inverter compressors with high-humidity dehumidification modes as standard on those addresses. The salt spray load from the bay side is standard bayside exposure and coastal-treated condensers are a line item for beach-adjacent properties within 800 metres of the foreshore. Edithvale railway station is on the Frankston line and about 40% of our Edithvale customers are CBD commuters on weekday-lockbox install schedules. The 1960s beach cottage and post-war weatherboard stock is the most consistent housing type - single-skin timber walls, easy pipe routing, wall-bracket outdoor unit placement.

Bay-facing strip with wetlands to the east creating localised humidity, exposed south-westerlies year round

Why Edithvale homeowners choose Bellair

The Ramsar-listed wetlands status has an interesting side effect on installs - Kingston Council enforces stricter noise limits on outdoor units within 300 metres of the wetland boundary because migratory bird populations use the site and low-frequency compressor noise can affect nesting behaviour. Practically that means we spec quiet-mode compressors under 45 decibels for wetlands-adjacent properties, which limits our brand and model choices to Mitsubishi Electric slim-line and Fujitsu marine-grade ranges rather than the cheaper compressor options. Edithvale is 18 kilometres from Botanic Ridge - a 25 to 30 minute drive on a normal day. The renovation activity is heavy on the 1960s cottages along Berry Avenue, Baden Powell Drive and the foreshore streets, with owners typically extending rearward and upgrading from a single air conditioner to a multi-head reverse-cycle system covering three or four rooms. Kingston Council planning is straightforward for standalone residential installations. Winter southerlies drive rain horizontally into south-facing walls and we install a rear drip shield on any south or south-west facing outdoor unit as standard rather than an extra.

What's included in your Edithvale install

Included in the Edithvale quote: the split system in your chosen size and brand with quiet-mode compressor specification for wetlands-adjacent properties within 300 metres of the reserve, coastal-spec heat exchanger for beach-adjacent properties within 800 metres of the foreshore, all copper pipework and electrical cabling, stainless-steel wall brackets rated 600mm minimum above ground, standard back-to-back install with a short pipe run through cavity brick or timber weatherboard, drain to the nearest legal point, controller pairing and commissioning on both cooling and heating cycles, cleanup and removal of packaging, full manufacturer warranty and our own 7-year workmanship guarantee. Not included: Kingston Council planning permits, engineering reports, electrical switchboard upgrades on pre-1980 buildings, penetrations through concrete slabs, and pipe runs longer than the standard 5-metre kit which are quoted per additional metre before we start work.

Postcode: 3196 · Council: City of Kingston · Region: Bayside Peninsula edge

Typical home styles: 1960s beach cottage, post-war weatherboard, renovated Californian bungalow, 1970s cream-brick veneer

Local landmarks: Edithvale Beach · Edithvale railway station · Edithvale Wetlands (Ramsar site)

Get your Edithvale quote in under a minute

We also install close to Edithvale

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.