Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Ferntree Gully North VIC · Outer Eastern Melbourne

Split System Installation in Ferntree Gully North, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Ferntree Gully North and surrounding suburbs.

Split system installation in Ferntree Gully North

Ferntree Gully North centres on the Angliss Hospital campus - the district public hospital sits on Talaskia Road and defines the character of the immediate area with medical suites, allied-health clinics, aged-care facilities and specialist offices concentrated on the surrounding streets. Medical-suite install work is our niche here: consulting rooms, treatment rooms, and small day-surgery recovery bays where infection-control considerations dictate our filter and duct specifications. We use G4-rated pre-filters at the return, seal the linesheet penetrations with intumescent sealant to maintain fire compartment ratings, and provide the annual service report the health-practitioner insurers require. Mountain Highway runs through the northern half of the suburb as a commercial corridor - small strip retail, dentists, physios, the odd cafe - and we've done cassette and wall-mount work in most of the tenancies between Wantirna and the Ferntree Gully station end. Residential Ferntree Gully North is a settled belt of 1970s and 80s brick veneer, mostly single and double-storey on 650 to 850 square metre blocks, with streets that fan north off Mountain Highway toward the Wantirna border. Blind Creek and the shared-use trail wrap around the eastern edge - the properties backing the trail are on slightly lower ground and we check condensate fall on those blocks the same way we do near Lakewood Reserve in Knoxfield.

Outer eastern Melbourne, no coast, hot summers with west sun, cooler near the hills

Why Ferntree Gully North homeowners choose Bellair

Ferntree Gully North is about forty-one kilometres north-east of our Botanic Ridge base. The work here is replacements and zoned or multi-head fits in post-war and 70s-80s homes, upstairs runs in the double-storey builds, switchboard upgrades to suit, and sizing for both heating and cooling. Matt holds ARCtick licence AU 55218 with 28 years in the trade, so the refrigerant work is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We fit Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll match the system to the home rather than push a brand. Fixed price agreed before we start.

What's included in your Ferntree Gully North install

A Ferntree Gully North install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On the double-storey homes we plan any upstairs run before quoting, and on replacements we check the older switchboard carries a modern load. It's all in the fixed price agreed up front, with any upgrade flagged before you commit. Medical-suite jobs on the Angliss Hospital strip get an annual service report as part of the workmanship warranty, sealed penetrations to maintain fire compartment ratings, and G4-rated return filters as standard.

Postcode: 3156 · Council: City of Knox · Region: Outer Eastern Melbourne

Typical home styles: post-war brick, 1970s-80s family homes, double-storey brick, renovated homes

Local landmarks: Mountain Highway shops · Blind Creek Trail · Wantirna border

Get your Ferntree Gully North quote in under a minute

We also install close to Ferntree Gully North

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.