Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Mount Waverley VIC · South-East Melbourne

Split System Installation in Mount Waverley, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Mount Waverley and surrounding suburbs.

Split system installation in Mount Waverley

Mount Waverley's a settled, well-regarded family suburb built out mostly in the 60s and 70s, with solid brick homes on decent blocks, pockets of bushy reserve like Damper Creek and Valley Reserve, and the Pinewood shops giving it a village heart. It sees some of the knockdown-rebuild activity of its neighbour Glen Waverley, but a lot of the original stock is still here, so the work splits between the two. On the original 60s-70s brick homes, replacements are the mainstay — pulling a tired old unit and dropping in a properly-sized modern one — and the switchboards from that era generally need a look before they'll take a reverse-cycle load. These homes have defined rooms, often a formal lounge separate from the family room, so we work through single-head versus a zoned two-head setup. The pipework's usually a clean back-to-back or short run, and the blocks give room to site the outdoor unit sensibly. On the newer rebuilds and renovated homes with open-plan glassy extensions, we size to the volume and plan any upstairs run. Near the creek reserves the blocks can be leafier, so leaf litter around the unit comes into it. Mount Waverley's inland with no coast, so it's clean distribution and sizing for hot summers. We plan each job to the actual home.

❄ Inland south-east — no coast, hot summers, leafy reserves through the suburb

Why Mount Waverley homeowners choose Bellair

Mount Waverley is about twenty-four kilometres north of our Botanic Ridge base. The work here is a mix of replacements and switchboard upgrades in the original 60s-70s brick homes, and multi-heads and upstairs runs in the rebuilds and renovated open-plan homes. Matt holds ARCtick licence AU 55218 with 28 years in the trade, so the refrigerant work is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We install Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll match the system to the home rather than push a brand. Fixed price agreed before we start.

What's included in your Mount Waverley install

A Mount Waverley install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On the original brick homes we allow time to check the older switchboard on a replacement, and on the rebuilds and renovated homes we plan any upstairs run and size for the glazing. It's all in the fixed price agreed up front, with any upgrade flagged before you commit. If your home backs onto Damper Creek Reserve or Valley Reserve we allow for the mature canopy shading one side and factor the temperature swing that creates between rooms.

Postcode: 3149 · Council: City of Monash · Region: South-East Melbourne

Typical home styles: 1960s-70s brick veneer, knockdown rebuilds, renovated open-plan homes, family homes near the reserves

Local landmarks: Pinewood Shopping Village · Damper Creek Reserve · Valley Reserve

Get your Mount Waverley quote in under a minute

We also install close to Mount Waverley

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.