Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Balwyn North VIC · Inner Eastern Melbourne

Split System Installation in Balwyn North, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Balwyn North and surrounding suburbs.

Split system installation in Balwyn North

Balwyn North - the Greythorn shops end and the streets running down toward Koonung Creek - shares its neighbour's Balwyn High zone pull, so it's seen the same wave of knockdown rebuilds among its original bungalows and post-war homes. The work splits the same way. The large new homes want multi-head systems across open-plan floorplans, considered cavity runs upstairs, and sizing to the volume for all the glass and high ceilings. The original California bungalows are double brick, so core-drilling and careful routing, with switchboards that usually need an upgrade, and the post-war homes are more forgiving single-level jobs where replacements are common. Boroondara's vegetation protection controls shape placement on the treed blocks, so plant works around protected trees and clear of leaf litter. Down toward Koonung Creek and the freeway the land dips, so on the sloping blocks we take care where the condenser sits and how it drains, and some homes near the freeway want quieter indoor units. Balwyn North's inland with no coast, so it's clean distribution and right-sizing for hot summers. It's an affluent, changing suburb where old and new sit side by side, so we plan each job to the specific home and quote it straight.

Eastern Melbourne - no coast, hot summers; rebuilds and bungalows, freeway on the edge

Why Balwyn North homeowners choose Bellair

Balwyn North is about thirty-three kilometres north-east of our Botanic Ridge base. The work here is multi-heads and upstairs runs in the rebuilds, core-drilling and switchboard upgrades on the original bungalows, replacements in the post-war stock, and placement around protected trees. Matt's ARCtick licensed, AU 55218, with 28 years on the tools, so the refrigerant work is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We install Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll match the system to the home rather than push a brand. Fixed price agreed before we start.

What's included in your Balwyn North install

A Balwyn North install covers supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On the rebuilds around Greythorn we plan the upstairs runs and size for the glazing on the north and west elevations, and on the original bungalows we core-drill carefully, check the switchboard and work around Boroondara's protected trees. Near Koonung Creek and the freeway we handle the sloping blocks and quieter indoor units for freeway-facing bedrooms. It's all in the fixed price agreed up front, with any upgrade flagged before you commit - and every job carries our 7-year workmanship warranty.

Postcode: 3104 · Council: City of Boroondara · Region: Inner Eastern Melbourne

Typical home styles: California bungalow, post-war brick, large modern rebuilds, double-storey homes

Local landmarks: Greythorn shops · Koonung Creek Trail · Balwyn High School zone

Get your Balwyn North quote in under a minute

We also install close to Balwyn North

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.