Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Blackburn VIC · Eastern Melbourne

Split System Installation in Blackburn, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Blackburn and surrounding suburbs.

Split system installation in Blackburn

Blackburn is one of the greenest suburbs in the middle-east belt because of the Blackburn Lake Sanctuary - a genuine pocket of remnant bushland right in the middle of the suburb - and the community's long tradition of preserving native canopy on private blocks. That tree cover is the single biggest factor shaping the install work here. Whitehorse Council's vegetation protection controls apply widely and mature eucalypts, ironbarks and native shrubs sit on nearly every quote. We plan condenser placement clear of protected trees and drip lines, we lift the outdoor unit on a proper stand because leaf litter and bark drop are constant, and we route pipework to avoid coring through walls that back onto protected specimens. The housing stock reflects the era - a lot of Federation and interwar homes near the station and the village, post-war brick further out, and quality architect-designed homes on the treed backblocks toward the sanctuary. Federation homes bring the standard period-home considerations: no cavity, high ceilings, careful discreet routing, and original switchboards that need an upgrade. The canopy-protected streets bring a particular consideration around indoor placement too, because the deep shade means solar-gain calculations differ from a bare-block suburb. Blackburn is inland, no coast in play, so it's clean distribution and right-sizing for hot summers under the trees.

Eastern Melbourne - no coast, hot summers; heavily treed, canopy-protected blocks

Why Blackburn homeowners choose Bellair

Blackburn is about thirty kilometres north-east of our Botanic Ridge base. The work here is placement planned around protected trees and vegetation overlays, core-drilling and routing through Federation and interwar homes, sizing for high ceilings, and switchboard upgrades on the older stock. Matt's ARCtick licensed, AU 55218, with 28 years on the tools, so the refrigerant work is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We install Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll match the system to the home rather than push a brand. Fixed price agreed before we start.

What's included in your Blackburn install

A Blackburn install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On these treed blocks we plan placement around protected trees and vegetation overlays, site the outdoor unit up and clear of leaf litter, and on the period homes we core-drill and check the switchboard. It's all in the fixed price agreed up front, with any upgrade flagged before you commit. Every install here carries the manufacturer warranty in full plus our own 7-year workmanship warranty, and Matt personally attends every job - 28 years in the trade.

Postcode: 3130 · Council: City of Whitehorse · Region: Eastern Melbourne

Typical home styles: Federation, interwar, post-war on treed blocks, canopy-protected homes

Local landmarks: Blackburn Lake Sanctuary · Blackburn station & village · Furness Park

Get your Blackburn quote in under a minute

We also install close to Blackburn

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.