Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Nunawading VIC · Middle-Eastern suburbs

Split System Installation in Nunawading, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Nunawading and surrounding suburbs.

Split system installation in Nunawading

Nunawading has one thing that matters on every install we do out there - the Springvale Road and Whitehorse Road intersection is the busiest arterial junction in Melbourne's eastern suburbs and the traffic noise ordinance for residential properties within 200 metres of the intersection is strict. Practically that means we spec quiet-mode compressors under 45 decibels on outdoor units for the streets fronting Springvale Road and the northern side of Whitehorse Road, so the residual compressor noise doesn't add to the traffic noise complaint threshold the council enforces. The residential grid away from the arterials is quieter and the standard install brief is straightforward - 700 to 900 square metre blocks, wide side returns, generous rear yards, and ground-pad outdoor unit placement. The 1960s cream-brick veneer stock along Nelson Road, Central Road and Silver Grove is the most consistent housing type - 230mm cavity brick, timber floor on bearers, standard-truss roof cavity, easy back-to-back pipe runs. Nunawading has active infill development along Whitehorse Road with older single-fronted stock being subdivided into stacked townhouses, and those new builds typically arrive with pre-provisioned pipe runs and mounting points for our commissioning.

Middle-east belt, similar frost pockets to Mitcham, dry summer heat trapped by inland position

Why Nunawading homeowners choose Bellair

Nunawading station is on the Belgrave-Lilydale line one stop east of Blackburn, and the suburb has a heavy commuter demographic - similar to Mitcham, most installs happen on weekdays with the customer at work and we run jobs on a lockbox or nominated-key basis. The 1980s dark-brick family homes along Bourne Road and Springfield Road are the trickiest install profile in Nunawading because the standard truss spacing on 1980s builds is 900mm rather than the earlier 1930mm-standard, and the drilling access for pipework through the roof cavity is tighter than the older stock. We spec Mitsubishi Electric, Fujitsu, Panasonic or Toshiba slim-line units for these tighter roof cavities, avoiding the bulkier profiles that fit older houses. Nunawading's proximity to Slater Reserve and the Blackburn Creek wetland corridor means about 15% of properties back onto reserve land with mature Eucalypts overhanging the rear yard - the falling gum leaves and branches are a real concern for outdoor unit intake grilles, and we always fit a debris shroud on any Nunawading condenser installation adjacent to reserve boundaries. Whitehorse Council planning is straightforward - permits rarely required.

What's included in your Nunawading install

Included in the Nunawading quote: the split system in your chosen size and brand with quiet-mode compressor specification for properties near Springvale Road or Whitehorse Road, all copper pipework and electrical cabling, standard back-to-back or ground-pad install with debris shroud on any condenser adjacent to reserve land, drain to the nearest legal point, controller pairing and commissioning on both cooling and heating cycles, cleanup and removal of packaging, full manufacturer warranty and our own 7-year workmanship guarantee. Not included: Whitehorse Council planning permits, decommissioning of existing ducted gas heating (quoted separately), engineering reports for multi-head systems, electrical switchboard upgrades on pre-1980 buildings, penetrations through concrete slabs, tree-protection zone permits, and pipe runs longer than the standard 5-metre kit which are quoted per additional metre before we start work.

Postcode: 3131 · Council: City of Whitehorse · Region: Middle-Eastern suburbs

Typical home styles: post-war weatherboard, 1960s cream-brick veneer, 1980s dark-brick family home, new stacked townhouse

Local landmarks: Nunawading railway station · Whitehorse Road strip · Slater Reserve

Get your Nunawading quote in under a minute

We also install close to Nunawading

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.