Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Cranbourne West VIC · South-East Melbourne growth corridor

Split System Installation in Cranbourne West, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Cranbourne West and surrounding suburbs.

Split system installation in Cranbourne West

Cranbourne West grew out along Thompson Road and around the Marriott Waters estate, and it's a similar story to the rest of the corridor — mostly brick-veneer homes built in the last decade or two — but with a few pockets of older places closer to the highway that change the job. In the newer parts, the layouts are predictable and the work's clean: open-plan rear living, 2.7m ceilings, back-to-back straight out to the side of the house. Where it gets interesting is the wind exposure. Cranbourne West is flat and fairly open, and outdoor units on the western walls cop both the weather and the afternoon sun, so we mount them where they're not baking all day and brace them properly. Sizing here leans toward the larger end because a lot of these homes have big open living-dining-kitchen zones with minimal internal walls to hold the cool air — undersize the head and it'll run flat out on a 38-degree day and never catch up. For the bigger family homes we'll often recommend a multi-head so one condenser feeds the living area and the main bedroom rather than hanging separate units. The older homes near Western Port Highway are a different beast — smaller rooms, sometimes tired wiring — and we check the switchboard on those before anything else. We've worked both ends of this suburb enough to quote either accurately.

❄ Inland south-east — flat and open, western walls cop both afternoon sun and wind

Why Cranbourne West homeowners choose Bellair

Cranbourne West sits about ten kilometres from our Botanic Ridge base, an easy run for us. Expect the usual mix out here — single-head fits and multi-heads in the newer estate homes with their big open-plan zones, plus replacements and switchboard upgrades in the older pockets near the highway. Matt has 28 years in the trade and holds ARCtick licence AU 55218, so the gas side is handled correctly every time. Every install carries the full manufacturer warranty and our 7-year workmanship warranty. We fit Mitsubishi Electric, Fujitsu, Toshiba, Panasonic, Samsung, Haier and LG, and we'll help you pick the right unit for the room rather than upsell. The price is fixed and agreed before we start.

What's included in your Cranbourne West install

Every Cranbourne West install covers supply of the unit, fitting to AS/NZS 3000, tidy back-to-back or routed pipework, condensate drainage, electrical connection, removal and recycling of any old unit, commissioning and a clean-up. Given how open and wind-exposed the blocks are here, we take care with outdoor unit placement so it's not baking in the western sun or getting battered, and we brace it properly. All of it's in the fixed price agreed up front, switchboard upgrade flagged beforehand if the older homes need one.

Postcode: 3977 · Council: City of Casey · Region: South-East Melbourne growth corridor

Typical home styles: modern brick veneer, Marriott Waters estate homes, open-plan family homes, older highway-side homes

Local landmarks: Marriott Waters · Marriott Waters Wetlands · Thompson Road corridor

Get your Cranbourne West quote in under a minute

We also install close to Cranbourne West

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.