Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Main Ridge VIC · Mornington Peninsula (hinterland)

Split System Installation in Main Ridge, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Main Ridge and surrounding suburbs.

Split system installation in Main Ridge

Main Ridge runs along the highest ground on the Peninsula, and you feel it the moment you're up there — cooler, greener, wrapped in forest, with big rural properties and wineries set down long private drives. It's about as far from a suburban split system job as you get on the Peninsula. Homes are large and spread out, often architect-designed to sit in the landscape, so pipe runs are long and need careful planning, and we're regularly cooling a main house plus a studio, guest wing or cellar space. Being the coolest, wettest part of the Peninsula, heating is the main event here — a reverse-cycle system has to hold a room through a genuinely cold ridge-top winter, so we size for that first and cooling second. Most of these blocks are heavily treed and carry a bushfire rating, which shapes where the outdoor unit and its wiring can go, and we plan to it. Long gravel driveways and forest access mean we sort out how gear gets in ahead of time. Tank water, sometimes three-phase power for the winery operations, and older switchboards needing an upgrade are all common. Up here every property is its own puzzle, so we plan each job around the home, the block and the climate rather than reaching for a standard approach.

❄ The Peninsula's high ridge — coldest, wettest part; genuine winter heating load, forested bushfire country

Why Main Ridge homeowners choose Bellair

Main Ridge is about thirty-eight kilometres south-west of our Botanic Ridge base, up on the spine of the Peninsula. The work here is long runs across large rural and forest properties, sizing reverse-cycle systems for a cold ridge-top winter, cooling studios and wings alongside the main house, and switchboard upgrades on the older places. Matt's ARCtick licensed, AU 55218, with 28 years on the tools, so the gas side is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We install Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll size for the heating load first rather than push a brand. Fixed price agreed before we start.

What's included in your Main Ridge install

A Main Ridge install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On the large forest-block properties here we allow real time for the long runs and for siting plant sensibly on bushfire-rated land, and we check the older switchboards carry the load before we quote. It's all in the fixed price agreed up front, with any upgrade flagged before you commit.

Postcode: 3928 · Council: Mornington Peninsula Shire · Region: Mornington Peninsula (hinterland)

Typical home styles: large rural estate, architect-designed home, forest-block property, winery homestead

Local landmarks: Main Ridge wineries · Greens Bush (Mornington Peninsula NP) · Arthurs Seat ridge

Get your Main Ridge quote in under a minute

We also install close to Main Ridge

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.