Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Ringwood VIC · Outer Eastern Melbourne

Split System Installation in Ringwood, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Ringwood and surrounding suburbs.

Split system installation in Ringwood

Ringwood's had a genuine makeover - Eastland's expansion and the transport interchange have turned the centre into a hub, with apartment towers rising near the station alongside the post-war brick homes that make up most of the suburb. That mix gives us varied work. In the newer apartments near the centre, owners-corporation approval and tight setbacks come into placement, and in the taller blocks external condensers can be restricted, so we check what's feasible first. The post-war brick homes are conventional replacement and upgrade jobs - single-level with defined rooms, a clean back-to-back, and switchboards that usually need a look. A lot of these homes are on their second round of heating and cooling, so replacements are common. The blocks are a reasonable size, and Ringwood's leafy, so leaf litter around the outdoor unit is worth keeping in mind. Being on the edge of the foothills it's a touch cooler, so heating counts and we size reverse-cycle for both. Ringwood's inland with no coast, so it's clean distribution and sizing for hot summers. It's a changing suburb where a station-side apartment and a sixty-year-old brick home sit close together, so we plan each job to the property and quote it straight.

Outer eastern Melbourne - no coast, hot summers, a touch cooler on the foothills

Why Ringwood homeowners choose Bellair

Ringwood is about forty kilometres north-east of our Botanic Ridge base. The work here is owners-corporation placement in the station-precinct apartments, replacements and switchboard upgrades in the post-war brick homes, and zoned or multi-head fits sized for both heating and cooling. Matt's ARCtick licensed, AU 55218, with 28 years on the tools, so the refrigerant work is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We fit Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll match the system to the property rather than push a brand. Fixed price agreed before we start.

What's included in your Ringwood install

A Ringwood install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. In the station-precinct apartments we check what the building allows and sort owners-corporation placement first, and on the post-war homes we handle the replacement cleanly and check the switchboard. It's all in the fixed price agreed up front, with any upgrade flagged before you commit. If you're in one of the newer Eastland-precinct apartments toward Maroondah Highway, we handle the owners-corporation paperwork and check the balcony or plant-deck rules on the outdoor unit before we quote, so there are no surprises on the day.

Postcode: 3134 · Council: City of Maroondah · Region: Outer Eastern Melbourne

Typical home styles: post-war brick, station-precinct apartments, townhouses, family homes

Local landmarks: Eastland · Ringwood station interchange · Ringwood Lake

Get your Ringwood quote in under a minute

We also install close to Ringwood

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.