Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Tecoma VIC · Dandenong Ranges

Split System Installation in Tecoma, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Tecoma and surrounding suburbs.

Split system installation in Tecoma

Tecoma is a small foothills suburb with an outsized story: in 2013 the community fought a two-year battle against a McDonald's built on Burwood Highway. The store went ahead and later closed, and the site is now a different tenant - but the fight put Tecoma on the map and the shopfronts along Burwood Highway carry a fairly strong independent-trader character as a result. Retail fit-out work here is our steady commercial run: cafes, a couple of small studios, the servos, and a few professional offices above the shops on the highway strip. Split systems in these shopfronts have to sit high on the wall - usually 2.6 to 2.8 metres - because the shops are old and the ceiling is tin-lined with pressed metal profiles, and we can't cassette-mount without ripping the ceiling out. We use a Fujitsu ASTG or Mitsubishi Heavy Industries SRK series wall-mount rated for wider air throw and we angle the louvre downward off the counter line so the barista doesn't cop the airstream all shift. Residential Tecoma climbs uphill from Burwood Highway toward Upwey and Kallista - the streets are short, the blocks are quarter-acre, and the houses are mostly 1960s cream brick or later brick veneer. Nothing unusual to install there, but the properties on the highway side get truck noise and dust off the road, so we always recommend a Mitsubishi Heavy or Toshiba head with a proper high-density F5 filter that the customer can pull and rinse.

Cool hills village - cold winters, heating-first climate, bushfire-rated blocks

Why Tecoma homeowners choose Bellair

Tecoma is about forty-six kilometres north-east of our Botanic Ridge base. The work here is heating-first sizing for a cool hills climate, considered runs on sloping blocks, fire-rated placement to the block's BAL, and switchboard upgrades on the older cottages. Matt's ARCtick licensed, AU 55218, with 28 years on the tools, so the refrigerant work is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We fit Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll size the system for the climate and the home rather than push a brand. Fixed price agreed before we start.

What's included in your Tecoma install

A Tecoma install includes supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. Up here we size for the cool climate, place plant to the property's bushfire rating, and site the outdoor unit up and clear of leaf litter so it breathes and drains. It's all in the fixed price agreed up front, with any switchboard upgrade flagged before you commit.

Postcode: 3160 · Council: City of Yarra Ranges · Region: Dandenong Ranges

Typical home styles: village cottages, family homes, sloping-block homes, older weatherboard

Local landmarks: Tecoma station · Burwood Highway village · Dandenong Ranges

Get your Tecoma quote in under a minute

We also install close to Tecoma

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.