Call 0416 105 912 Free Quotes · ARCtick AU 55218 · Same-Week Install
Get Free Quote →

Service area · Croydon South VIC · Outer Eastern Melbourne

Split System Installation in Croydon South, VIC

Fixed-price installs from $1,690. ARCtick licensed, fully insured, 7-year workmanship warranty. Same-week appointments across Croydon South and surrounding suburbs.

Split system installation in Croydon South

Croydon South is the flatter, more industrial-adjacent side of the Croydon grid, running along Dorset Road down toward Bayswater North and the Kilsyth South factory zone. It hasn't had the town-centre renewal that transformed Croydon proper, so the built fabric stays quite intact from the 1950s and 60s subdivisions - single-level brick veneer and weatherboard on 700-square-metre blocks laid out to the old Croydon Shire pattern. Cheong Park is the local heart, and the shopping strip along Dorset Road runs the essentials without pretending to be a destination. Most of the work here is people upgrading from a first-generation ducted gas or a decade-old wall split, and the two conversations that come up more often here than elsewhere are ceiling insulation quality (a lot of it is original bulk pink still doing its 1970s job) and the switchboard load, since a household that once had one wall unit is now adding a second reverse-cycle system and often an induction cooktop and an EV charger in the same year. Roof pitches are shallow and simple on these homes, which makes bracketry and drainage straightforward. There's a slow trickle of townhouse infill along the arterial and around the shops, and those bring owners-corporation rules into placement conversations. Foothill air keeps evening temperatures a degree or two below the Ringwood corridor, and heating gets the sizing priority.

Outer eastern Melbourne - no coast, hot summers, a touch cooler near the foothills

Why Croydon South homeowners choose Bellair

Croydon South is about forty-four kilometres north-east of our Botanic Ridge base. The work here is mostly replacements and single or zoned multi-head fits in post-war family homes, switchboard upgrades to suit, the odd townhouse-infill job, and sizing for both heating and cooling. Matt's got 28 years in the trade and holds ARCtick licence AU 55218, so the refrigerant work is by the book. Every install carries the full manufacturer warranty plus our 7-year workmanship warranty. We install Mitsubishi Electric, Fujitsu, Panasonic, Toshiba, Samsung, Haier and LG, and we'll match the unit to the room rather than push a brand. Fixed price agreed before we start.

What's included in your Croydon South install

A Croydon South install covers supply of your chosen unit, fitting to AS/NZS 3000, neat back-to-back or routed pipework, condensate drainage, electrical connection, old unit removal and recycling, commissioning and clean-up. On replacements we allow time to pull the old unit cleanly and check the older 1950s/60s switchboard actually carries a modern reverse-cycle load alongside the induction and EV loads that have crept into these homes. In the townhouse infill along Dorset Road we sort owners-corporation placement first. Roof space and ceiling insulation get a look-in during the walkthrough since a lot of these homes still run original 1970s bulk. It's all in the fixed price agreed up front, with any switchboard upgrade flagged and priced before you commit.

Postcode: 3136 · Council: City of Maroondah · Region: Outer Eastern Melbourne

Typical home styles: post-war brick, 1960s family homes, weatherboard, townhouse infill

Local landmarks: Croydon South shops · Cheong Park · Dorset Road

Get your Croydon South quote in under a minute

We also install close to Croydon South

Real Installs · Real Reviews

Verified 5-Star Google Reviews

Every review below is a verified Google review with photos of the actual installation.

Split system installation by Bellair for Arelys BarrySplit system installation by Bellair for Arelys Barry
Arelys BarryArelys Barry
Local Guide · 3 weeks ago
★★★★★

Matt and his team are exceptional. I sent a message Saturday morning, I received a text message and a phone call, and a site visit by 11am. I am not use to such high customer service. Matt tried to have my install done asap as we had no heating. Install was also exceptional, as his pricing and quality of install and removal of old unit is beyond expectations. Was not an easy job but his quote was so honest and fair. I can hardly notice the outside cabling (first photo). He was also so polite, professional and caring. Thank you Matt and team. Will contact shortly for further split systems install. I will only contact your company in the future. Also, your system recommendation has been amazing. Many, many thanks for everything.

Melbourne

Split system installation by Bellair for Milon PangSplit system installation by Bellair for Milon Pang
Milon PangMilon Pang
Local Guide · 2 days ago
★★★★★

Communication with Matt was seamless and transparent. He came to inspect my place prior for a quick chat and to issue an estimated quote not long after. We eventually had a date fixed for two units to be installed. One required replacement of the previous old unit (included removal from property), and the second required a new hole to be drilled for installation. Matt and his team took roughly 3.5-4h. They were immaculate with their work! They left my place decently clean. I would have to say that this was the best customer service that I have had. Everything was discussed clearly, and my questions were addressed appropriately by Matt. I would highly recommended them if you are still considering! Thank you very much, Matt and your boys!

Melbourne

Split system installation by Bellair for Alexander MoloksherSplit system installation by Bellair for Alexander Moloksher
Alexander MoloksherAlexander Moloksher
4 weeks ago
★★★★★

We recently had Samsung multi-head, multi-room split reverse cycle air conditioners installed throughout our home by Bellair, and we could not be happier with the outcome. Matt and his team completed the installation to the highest workmanship standards, with exceptional attention to detail and immaculate quality throughout the entire project. The finished result looks incredibly neat, professional, and well thought out. What truly stood out was Matt’s professionalism and communication at every stage of the installation. He kept us informed throughout the process, demonstrated outstanding competence and technical expertise, and delivered a flawless end result. It is clear that Matt and his team genuinely take pride in their work and customer satisfaction. I would highly recommend Bellair to anyone looking for high-quality air conditioning installation services.

Melbourne

Split system installation by Bellair for Michelle BellSplit system installation by Bellair for Michelle Bell
Michelle BellMichelle Bell
Frankston · 4 weeks ago
★★★★★

Highly recommend Bellair! Matt and the team installed a ducted heating and cooling system at my clinic in Frankston and the whole experience was fantastic from start to finish. Professional, reliable, great communication, and the quality of work was excellent. Matt was an absolute pleasure to deal with and made the whole process so easy. Could not be happier with the result!

Frankston

Split system installation by Bellair for Onyeka Robinson
Onyeka RobinsonOnyeka Robinson
Melbourne · 6 days ago
★★★★★

Matt did an excellent job installing our new Mitsubishi Electric heating and cooling system. He was professional, punctual, and took the time to explain everything clearly. The installation was completed to a high standard, and the work area was left clean and tidy. We're very happy with the result and appreciate the added peace of mind from the 5-year Mitsubishi Electric manufacturer warranty and 7-year Bellair workmanship warranty. Highly recommend Matt and the Bellair team.

Melbourne

FAQ

Common Questions About Split Systems

Most of our fixed-price split system installs fall between $1,690 and $1,890, depending on the unit, the size of the room and how the pipework needs to run. You get the all-inclusive price up front before we start — no surprises.
As a rough guide, a small bedroom suits a 2.5kW unit, a typical living room 5–6kW, and a large open-plan space 7kW or more. We measure properly during the site visit and size honestly so the system isn't over- or under-powered.
A standard single-head split system is usually done in 3–4 hours. Multi-head systems and trickier pipe runs can take most of a day. We'll give you a realistic time frame with your quote.
We supply and install Australia's most trusted brands — Mitsubishi Electric, Fujitsu, Haier, Samsung, Toshiba, Panasonic and LG. Every unit comes with a full manufacturer warranty plus our own 7-year workmanship guarantee.
We cover 190+ suburbs across the Mornington Peninsula, Bayside, South-East Melbourne, the inner east and the CBD. Chances are we've already done a job in your street — check our service areas below.
We recommend a service once a year to keep it running efficiently. We clean filters, check gas levels and test performance so your system lasts longer and runs cheaper.