Split System Installation in Lilydale, VIC

Split system installation in Lilydale

Lilydale sits at the end of the Belgrave-Lilydale rail corridor and it functions as the gateway between suburban Melbourne and the Yarra Valley - the practical consequence for our install work is that Lilydale properties tend to be on larger blocks than the inner east (800 to 1200 square metres is normal) and every install has generous side-return access and ground-pad options. The Cave Hill Quarry was operational until 1988 and about 15% of the older Lilydale housing stock is built on former quarry infill land west of Cave Hill Road - the soil is compacted rubble rather than clay and it's actually excellent for concrete pad footings on outdoor units because there's no reactive-clay slab movement to worry about like we deal with in the peninsula cracking-clay belt. The 1970s brick veneer stock along John Street, Anderson Street and Melba Highway has plenty of roof cavity for a clean pipe run and the standard back-to-back install works smoothly. The newer estate double-storeys along Mount View Road and Melba Highway are usually already piped-provisioned by the builder so our job is unit installation and commissioning rather than pipe routing from scratch.

Outer-eastern foothills, colder winter mornings than inner suburbs by 3 to 4 degrees, moderate summer heat with warm northerlies

Why Lilydale homeowners choose Bellair

Winter mornings in Lilydale run 3 to 4 degrees colder than the inner east and the surrounding foothills add frost pockets around Lillydale Lake and along the Yarra Valley approach - practically we spec any Lilydale reverse-cycle unit with a cold-climate compressor rating and a base-tray heater on the outdoor unit as standard rather than an upgrade, so the drain doesn't freeze on those -1 degree mornings that happen 15 to 20 times a winter. The drive from Botanic Ridge is 68 kilometres and 75 minutes each way in normal traffic - Melba Highway and Maroondah Highway are the two routes in and Maroondah is slower but more reliable than Melba which chokes near Chirnside Park at peak times. We schedule Lilydale installs for full-day slots because the round-trip commute makes half-day quotes uneconomical. The commercial-loft conversions near Lilydale station on Main Street are the exception to the standard suburban install brief - those are body-corporate managed with roof-plant condenser locations, and they need the OC approval process the same way inner-city apartments do. About 20% of our Lilydale work is on rural-residential acreage properties out towards Coldstream on the Melba Highway, which are effectively Yarra Valley farmhouse installs.

What's included in your Lilydale install

Included in the Lilydale quote: the split system in your chosen size and brand with cold-climate compressor rating as standard, base-tray heater on the outdoor unit, all copper pipework and electrical cabling, ground-pad or wall-bracket install as suits the site, drain to the nearest legal point, controller pairing and commissioning on both cooling and heating cycles, cleanup and removal of packaging, full manufacturer warranty and our own 7-year workmanship guarantee. Not included: Yarra Ranges Shire planning permits, owners corporation fees for the commercial-loft conversions near the station, engineering reports for multi-head systems, electrical switchboard upgrades on pre-1980 properties, penetrations through structural steel or concrete, and pipe runs longer than the standard 5-metre kit which are quoted per additional metre before we start work.

Get your Lilydale quote in under a minute

We also install close to Lilydale